S55 / N55 crank hub upgrade: why the stock hub slips and how to fix it
On the BMW S55 (M2 Competition, M3, M4) and N55 engines, the crank hub drives the timing-chain sprocket and the oil pump from the crankshaft. The factory hub is a three-piece design held together only by the clamping force of the crank bolt. When that friction is overcome, the hub spins on the crank and the engine timing moves.
Why the stock crank hub slips
More torque from a tune, a bigger turbo or ethanol
Hard launches, aggressive downshifts and missed shifts
Torque spikes from wheel hop or traction-control interventions
It can also happen on a stock car, with no warning beforehand
What happens when it spins
The camshafts fall out of time with the crankshaft. In the best case the engine only needs re-timing. In the worst case the pistons hit the valves and the engine needs a rebuild.
The VIS one-piece crank hub
One-piece billet hub in 42CrMo4 chromoly, quenched and tempered
Teeth induction-hardened to 55 HRC
Locked to the crankshaft with 4 pins, pre-pressed into the hub, so it cannot rotate
CNC-machined and laser-scanned for an exact fit
Drilling guide included; for stock cars up to 700+ hp
12-month warranty
Which cars it fits
BMW S55: M2 Competition and CS (F87), M3, M3 Competition and CS (F80), M4, M4 Competition, CS and GTS (F82 / F83).
BMW N55: 135i, M135i, M235i, M2 (N55), 335i, 435i, 535i, 640i, 740i and X1 / X3 / X4 / X5 / X6 xDrive35i. The N54 is not compatible. The full list is on the product page.
Installation
Fitting means locking the engine timing with the correct S55 / N55 tools, removing the factory hub, drilling 4 pin holes in the crank with the VIS guide and torquing to BMW specification. We strongly recommend an experienced BMW engine specialist.
See the VIS S55 / N55 crank hub upgrade or send us your model, year and engine code and we will confirm the fit.




Comments