EA113 balance shaft delete: why it is done and how the VIS freewheel works
The 2.0 TFSI EA113 has two counter-rotating balance shafts, driven together with the oil pump. On high-mileage and high-rpm engines this drive is a known weak point.
Why the balance shaft drive fails
The balance shafts and the original two-piece sprocket (06F105243C) wear out prematurely. When they fail they can damage the chain drive, and a balance shaft repair can cost up to $1,800.
What a balance shaft delete does
A balance shaft delete takes the balance shafts out of the drive. With the VIS Freewheel the shafts stay in the engine but are no longer driven, while the oil pump keeps working exactly as before.
The VIS freewheel
Sprocket in 42CrMo4 with induction-hardened teeth, 55 HRC
SKF / Timken 6300ZZ stainless, shielded bearing
Held by 2 C-clips and a 12.9 grade bolt
Tested at 8,500 rpm in oil at 100 °C
Fitted in about 30 minutes with basic hand tools; the oil pump stays in
Fully reversible, 12-month warranty
What you gain, and the trade-off
The engine revs more freely, with a small gain in power at the wheels, and the risk of seized shafts or a failing sprocket is gone. The trade-off is a little more vibration at certain rpm, which is why it is mostly chosen for performance and motorsport builds.
Which engines it fits
Every EA113 2.0 TFSI: engine codes AXX, BPY, BWA, BWJ, BYD, BHZ, BUL, BZC, CDL, BGB, BPG, BWE, BWT, BPJ and BYK, in the Golf Mk5 GTI, Golf Mk6 R, Audi S3 8P, TT / TTS 8J, Leon Cupra, Octavia RS and more.
See the VIS EA113 balance shaft delete kit. Pairs well with the EA113 HPFP upgrade kit.




Comments