top of page

Kit upgrade HPFP VIS Motorsport pentru motorul EA113. Scoate maximum din motorul tău.

Caracteristici

      Modification of the 2.0T FSI EA113/EA114 & MAZDA DISI engines far beyond OEM power levels requires an additional volume of high-pressure fuel in order to avoid "fuel cuts" especially in the midrange

     In many cases we see the factory fuel pump begin to suffer from pressure loss.

      The limitation of how much volume of fuel the high pressure pump can flow is dependent upon the volume displaced by the pressurizing cylinder inside the pump.

      This upgrade replaces the internal parts that are responsable for pressure and volume of fuel that reaches your injectors to meet the demands that come for higher power.

      Tolerances involved, the final surface finish on the piston inside the fuel pump is so critical that it can be damaged by touching them with bare hands.

      The tolerances between the piston and the new sleeve the piston rides in can only be measured by a machine which uses air volumes to measure the part clearances to within microscopic levels.
     CMM coordinate measuring machine is a device for measuring the physical geometrical characteristics of an object and used here with succes.

​

  •       In order to address this lack of fuel ,and power outputs never stop increasing VIS Motorsport developed 2 progressively stronger HPFP upgrade kits stages to suits everybody's build needs and the first company who designed and implement a working bigger stage/size and the only one available to customers around the world with 2 stages!

  • stage 1 -  175bar  - 55% more piston area for 250-600hp(used for 90% of hw setup)

  • LIGHTER THAN OEM

  • stage 2 -  200bar - 75% big bore for 450-650hp capabile of supporting 550hp on e85 and operating pressure of 200bar

  • stage 3 -over 200bar+

    

  •       Piston head is optimized for ideal hydrodynamic flow after we have tested over years different versions of design we find the perfect one.

  •      The surface is hardened by a process called Nitriding and heat treated in 3 different stages.

  •       Nitriding is not a coating, which can chip or flake off like DLC coating - instead, Nitrogen atoms are infused in to the atomic structure of the outer surface in depth of the material.

  •      It uses the OEM-style spring keeper and a redesigned piston tip end for more stability inside retainer, ensures that will not weaken by constant contact with camfollower or wear it,this is the best way allowing the piston inside to rotate even and don't get direct contact to cam follower if any failure of that occur due to bigger stress,protecting it,even saving the internal kit.

  • tested at 12.000 rpm on testing bench .

  •      Even a standard/stock or Stage 1 car will see benefits from running these internals, not only do you extend the life of the N276 solenoid since it’s not working as hard but you already have an upgraded HPFP giving you more headroom in your fueling system if you decide to do more modifications further,it can be installed and runned on Oem software.

  •      Can sustain easy 600 HP and over 175 bar starting from STG 1.

  •      It's being tested now for over 5 years on many configurations and different hardware/software setups around the globe and have proven again and again the reliability and performance you can expect from each and every  VIS Motorsport HPFP Upgrade kit

  •     It comes with fully detailed instructions including step by step fitting images including all necessary components and a detailed install sheet to get the job done.

​Modificarea motoarelor 2.0T FSI EA113/EA114 și MAZDA DISI mult peste nivelurile de putere OEM necesită un volum suplimentar de combustibil la înaltă presiune pentru a evita „fuel cut”-urile, mai ales la turații medii.

De multe ori, pompa de combustibil originală începe să piardă presiune.
Volumul de combustibil pe care îl poate livra pompa de înaltă presiune depinde de volumul deplasat de cilindrul de presurizare din interiorul pompei.
Acest upgrade înlocuiește piesele interne responsabile de presiunea și volumul combustibilului care ajunge la injectoare, pentru a face față cerințelor unei puteri mai mari.
Toleranțele sunt atât de strânse, iar finisajul final al suprafeței pistonului din pompă este atât de critic, încât poate fi deteriorat dacă îl atingi cu mâna goală.
Toleranțele dintre piston și noua cămașă în care culisează pot fi măsurate doar cu o mașină care folosește volume de aer pentru a măsura jocurile la nivel microscopic.
Mașina de măsurat în coordonate (CMM) este un dispozitiv care măsoară caracteristicile geometrice ale unui obiect și este folosită aici cu succes.
Pentru a rezolva lipsa de combustibil la puteri tot mai mari, VIS Motorsport a dezvoltat 2 trepte de kituri de upgrade HPFP, progresiv mai puternice, adaptate nevoilor fiecărui proiect. Suntem prima companie care a proiectat și pus în practică o treaptă/dimensiune mai mare funcțională și singura care oferă clienților din întreaga lume 2 trepte:
Stage 1 - 175 bar - suprafață a pistonului cu 55% mai mare, pentru 250-600 CP (folosit la 90% din configurații) - MAI UȘOR DECÂT OEM
Stage 2 - 200 bar - alezaj mărit cu 75%, pentru 450-650 CP, capabil să susțină 550 CP pe E85 și o presiune de lucru de 200 bar
Stage 3 - peste 200 bar+
Capul pistonului este optimizat pentru un flux hidrodinamic ideal; după ani de teste cu diferite variante de design, am găsit forma perfectă.
Suprafața este călită printr-un proces numit nitrurare și tratată termic în 3 etape diferite.
Nitrurarea nu este o acoperire care se poate ciobi sau exfolia ca DLC; atomii de azot sunt integrați în structura atomică a suprafeței exterioare, în adâncimea materialului.
Kitul folosește talerul de arc în stil OEM și un vârf de piston reproiectat pentru mai multă stabilitate în suport. Astfel, nu se slăbește prin contactul constant cu tachetul și nu îl uzează. Pistonul se poate roti uniform și nu intră în contact direct cu tachetul dacă acesta cedează din cauza solicitărilor mari, protejându-l și salvând chiar kitul intern. Testat la 12.000 rpm pe bancul de probă.
Chiar și o mașină de serie sau Stage 1 are beneficii de la aceste piese interne: prelungești viața solenoidului N276, care nu mai lucrează la fel de intens, și ai deja o pompă HPFP îmbunătățită, cu rezervă în sistemul de alimentare dacă decizi să faci modificări ulterioare. Se poate monta și folosi pe software OEM.
Susține ușor 600 CP și peste 175 bar începând de la STG 1.
Este testat de peste 5 ani pe numeroase configurații hardware/software din întreaga lume și și-a dovedit în repetate rânduri fiabilitatea și performanța pe care le poți aștepta de la fiecare kit de upgrade HPFP VIS Motorsport.
Vine cu instrucțiuni complete și detaliate, inclusiv imagini de montaj pas cu pas, toate componentele necesare și o fișă de montaj detaliată.

Date tehnice: - joc la vârful pistonului 0,001-0,00015 - abatere de circularitate max. 0,001 mm - 370-450 HB înainte de rectificare - nitrurare la adâncimea de 0,15-0,25 - duritate HV10-760 kgf/mm2 pentru cămașă și HV 50-56 / 1200-1400 kgf/mm2 pentru piston - aliaj H13 nitrurat / 34MoCr11 / RUL 1VB3 sau RUL 1VC2 - rezistență bună la șoc termic și la fisurare la cald - caracteristici mecanice și tenacitate bune la cald, duritate constantă pe tot ciclul de producție - puritate microstructurală ridicată, potrivită pentru lustruire - posibilitate de acoperire prin metode PVD/PA-CVD, călire prin inducție și nitrurare - rezistență la tracțiune 1960 kgf/mm2 - limită de curgere 1570 kgf/mm2 - garnitură O-ring Viton pentru carcasa pompei

ATENȚIE: Aceste piese sunt concepute și destinate exclusiv competițiilor. Nu trebuie montate pe un vehicul care circulă pe drumuri publice și autostrăzi. Montarea acestor piese pe un autovehicul care circulă pe drumurile publice și autostrăzi poate încălca legile și reglementările privind emisiile autovehiculelor.
Toate regulile standard de livrare se aplică comenzilor din UE și din restul lumii. Plata eventualelor taxe vamale și impozite este responsabilitatea destinatarului, iar acestea pot fi încasate la livrare. AVERTISMENT: Cancer și efecte nocive asupra reproducerii.

 

VIS MOTORSPORT

SC OVIS MOTORSPORT SRL

Str. Crinului 35, Nojorid, Bihor 417345, Romania

CUI RO36841373 · CAEN 4791 (Rev. 3)

Nr. Reg. Com. J2016002195055

EUID ROONRC.J2016002195055

Tel/WhatsApp: +40 740 310 235

​contact@vismotorsport.com

tiktok-icon-vis.png
Frame 196_edited.png

© 2016–2026 SC OVIS MOTORSPORT SRL · VIS Motorsport · Toate drepturile rezervate

bottom of page