VIS Motorsport HPFP Upgrade kit
1.4/1.8/2.0 TSI/TFSI EA888 GEN 3 MQB . Get the most out of your engine.
Modification of the 1.4/1.8/2.0TSI/TFSI EA888 GEN 3 MQB &others sharing same hpfp engines far beyond OEM power levels requires an additional volume of high-pressure fuel in order to avoid "fuel cuts" especially in the midrange ( 3000-5000 rpm ).
In many cases we see the factory fuel pump begin to suffer from pressure loss.
The limitation of how much volume of fuel the high pressure pump can flow is dependent upon the volume displaced by the pressurizing cylinder inside the pump.
In order to address the lack of fuel ,and power outputs never stop increasing VIS Motorsport developed the 2.0T MQB FSI HPFP UPGRADE KIT to suits everybody's build needs , we developed HPFP upgrade kits to suits everybody's build needs and the first company who designed and implement a working bigger stage/size available to customers around the world with
LIGHTER KIT THAT OEM WITH 2GR
It has 25% more surface area and is capable of OVER 250bar+ of pressure starting,and ending with over 50% volume and less weight by 10% comparred to OE (fuel pressure is dependant to type of engine as it fits many applications/engines)
This monster is ready for big turbo applications or just for stock power
Piston head is optimized for ideal hydrodynamic flow . The surface is hardened and heat treated in 2 different stages
It's being tested on many configurations and different hardware/software setups around the globe and have proven again and again the reliability and performance you can expect from each and every VIS Motorsport HPFP Upgrade kit.
It comes with fully detailed instructions including step by step fitting images and fitting tool.
- clearence at top of piston 0.001-0.00015
- deviation of circularity max 0.001mm
- 370-450hb before rectification
- nitrided at depth of 0.15-0.25
- hardness of hv10-760- kgf/mm2 for sleeve and hv 50-56/1200-1400kgf/mm2 for piston
-nitrided H13 alloy/ 34mocr11 /rul 1vb3/ rul1vc2
-good thermal and shock resistance or heat cracking
-mechanical characteristics and thoghness in hot condition,constant hardness throughout the production cycle
-high micro purity-level suitable for polishing
-posibility to be coated to pvd/pa cvd methods flame induction hardening and nitriding
-tensile strenght 1960kgf/mm2
-yeld strenght 1570kgf/mm2
WARNING: These parts are designed exclusively for competition. It should not be installed on a vehicle that is driven on public roads and highways. Installing these parts on a motor vehicle running on public roads and motorways is likely to violate laws and regulations on vehicle emissions.
ATENȚIE: Aceste părți sunt concepute și destinate exclusiv pentru competiție. Nu ar trebui instalat pe un vehicul care este condus pe drumuri publice și pe autostrăzi. Instalarea acestor piese pe un autovehicul care circulă pe drumurile publice și autostrăzi este susceptibilă să încalce legile și reglementările privind emisiile provenite de la autovehicule.
All standard shipping rules apply to EU/ROW orders. Payment of any duties and taxes is the responsibility of the recipient, and these fees may be collected at the time of delivery.
WARNING: Cancer and Reproductive Harm.